bing tracking image
Q & A Icon

How to Identify the Correct Replacement Shock for a Titan Surge Brake Actuator  

Updated 08/11/2026 | Published 08/06/2026

Products Featured in This Question



Question:

How can I tell what “ Damper Shock Absorber Shock Absorber” I need for my titan? The sticker identifying the trailer hitch is gone. Suggestions?

0
Dexter P-16 Model SLR surge brake actuator
Dexter P-16 Model SLR surge brake actuator
(click to enlarge)
Dexter P-16 Model SLR surge brake actuator
Dexter P-16 Model SLR surge brake actuator
(click to enlarge)
Dexter P-16 Model SLR surge brake actuator
Dexter P-16 Model SLR surge brake actuator
(click to enlarge)
Dexter P-16 Model SLR surge brake actuator
Dexter P-16 Model SLR surge brake actuator
(click to enlarge)

Expert Reply:

Thanks for sending the pictures Larry!

I was able to identify your actuator from the original tag. You have a Dexter P-16 Model SLR surge brake actuator rated for 3,500 lbs.

The Replacement Shock Absorber for Dexter Model 60 Brake Actuators # T2336200 you're looking at is the replacement shock for the older Dexter/Titan/Dico actuators and measures 4-15/16" collapsed and 6-1/4" extended, measured from the center of one mounting hole to the center of the other.

Can you measure your existing shock center to center between the mounting holes? If it's approximately 4-15/16" collapsed and 6-1/4" extended, then # T2336200 is the replacement you'll need.

expert reply by:
0
James D
Larry L. profile picture

Larry L.

8/10/2026

Is there one for the same hitch but rated for 5 or 7,000 lbs?

James D. profile picture
Etrailer Expert

James D.

8/11/2026

@LarryL If you're looking for a heavier duty shock in the same dimensions, we don't currently have a separate 5k to 7k lb rated version. These actuator shocks aren't really selected by trailer weight capacity like the actuator itself is. They're matched to the actuator design, mounting dimensions and required damping.
Larry L. profile picture

Larry L.

8/10/2026

I measured my existing shock center to center between the mounting holes and it's approximately 4-15/16" collapsed and 6-1/4" extended. Consequently from what you indicated the # T2336200 is the replacement I need to replace my existing shock. Can I order it through your website and do you have them on hand. Do you have a return policy if it ends up not to fit properly? Looking forward to your response. Thank you for all your help! Larry

James D. profile picture
Etrailer Expert

James D.

8/11/2026

@LarryL Nice, thanks for updating me. You can order # T2336200 by calling into our customer service department at 1-800-298-1517 or directly through our website. The product page will show you the current availability and estimated shipping information when you place your order. And yes, we do have a return policy. If you receive it and find that it isn't going to work, a new and unused item can be returned within 60 days of receiving it for a product refund. Appreciate you choosing etrailer and if you have any additional questions, just let us know!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>