Do You Carry a 5,200 Pound Axle with Hub Face of 86 1/2" and Spring Center 68 1/4"?

Updated 08/05/2026 | Published 07/31/2026

Products Featured in This Question

Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K

(236)

$912.71

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(666)

$11.90

Question:

I looking for a replacement Dexter Axle. S/N:611536651 DEX5514706 Dexter Axle: B21-5651 5200lb HF=86.50, SC= 68.25 Original order 028419-1

asked by: Ed P

Expert Reply:

Hello Ed,

It looks like you found the correct replacement. Sorry it took so long to get to your question, it is our busy season and we had quite the spike in questions.

Based on the information you provided, the Dexter Trailer Axle with Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K # 8327816-EB matches your axle's 5,200-pound capacity and 86-1/2 inch hub face measurement.

The one difference is the spring center measurement. The replacement axle does not come with spring seats installed, so you'll need to have a pair of Spring Seats for Typical 5,200 lb to 7,200 lb Round Trailer Axles with 3" Diameter # TRSS300 welded in the correct locations to match your 68-1/4 inch spring center measurement. Because proper spring seat placement is critical to axle alignment and tracking, I recommend having them installed by an experienced welder. Whatever you do, do not cut off the old ones.

If you're replacing the original axle because of damage or wear, this is also a good time to inspect your leaf springs, U-bolts, and suspension hardware to make sure everything is in good condition before putting the trailer back on the road.

Is this axle going back under a camper, equipment trailer, or something else?