Recommended Trailer Hitch for 2027 Hyundai Tucson

Question

Question:

Hi everyone, I just picked up a 2027 Hyundai Tucson and I'm looking to add a hitch. Is there an option available for the 2027?

asked by: Jason M

0

Expert Reply:

Hey Jason, congratulations on the new Tucson! We do have a hitch that fits the 2027 model. I recommend the B&W Trailer Hitch Receiver # BW45RV. This is a Class III hitch with a 2" receiver, which gives you a lot of flexibility when choosing hitch-mounted accessories. It also has a bolt-on installation and comes with a limited lifetime warranty.

What are you planning to use the hitch for?

expert reply by: Robin H

0

B&W Trailer Hitch Receiver
(click to enlarge)

Jason M.

8/7/2026

Thanks for the quick reply! A little bit of everything I suppose. I have a bike rack, we do some occasional towing as well. Also might pick up a cargo carrier. Anything you recommend for that?

Robin H.

8/7/2026

@JasonM awesome! For a cargo carrier check out our new Benton MoveHitch # B86VR or # B38VR (with cargo net). This is an aluminum 60x24 carrier so it helps cut down on the weight, and it has a 500 lb capacity which should be more than enough for anything you might be hauling. I also recommend adding the locking hitch pin # e43JR to keep it secure. If you will be towing you want to pick up wiring # C28DQ as well. This plug and play harness will give you a 4-way to power your signal lights. I also recommend adding an anti-rattle # e38FV for a solid setup with all of your accessories and ball mount.

Jason M.

8/7/2026

@RobinH looks good to me! Thanks again for the help and recommendations, this is exactly what I was looking for.

Robin H.

8/7/2026

@JasonM you're welcome, happy to help! If you need anything else don't hesitate to reach out.

Answer 1

No, it will not David but I have a comparable option that will. It's the Blue Ox Dual Purpose Coupler Lock/U-Lock item #BLU68VJ. This is a universal lock that works with 1-7/8", 2", and 2-5/16" ball couplers so it'll have no…

view full answer...

Answer 2

Hey David, the weight capacity of the Atlas PowerLifts Bike Rack for 2 e-Bikes - Powered Lift #AT52GR is 250 lbs total which means you can carry much heavier e-bikes and the battery of this is integrated into itself s you do not need to run wiring to…

view full answer...

Answer 3

Hi Tanya, Only certain bike racks are recommended for use behind a fifth wheel due to the extra movement and bounce the rack has to withstand behind a fifth wheel compared to when it's on the back of a vehicle. Bike racks are tested by the…

view full answer...

Answer 4

Hey John! You're in luck, Blue Ox recently developed a base plate kit that will work with the 2.0L Turbo and adaptive cruise control. For a Blue Ox setup on your 2026 Blazer I recommend the following: -Blue Ox Base Plate Kit - Removable Arms…

view full answer...

Answer 5

Hey Kate! Yes, the Kuat Pivot v3 Swing Away Hitch Extender #KU38CR will work with your Hollywood Racks Destination E Bike Rack #HLY36GR and 50 lb e-bikes. The weight of your bike rack is 46 lbs, so with the two e-bikes you're at a total weight of…

view full answer...

Answer 6

It depends on what trailer you'd consider to be "most" trailers, but with a Tesla you're going to be pretty limited so I'll assume it's nothing with brakes. So with that being said, we have the ZCI Circuit Protected Vehicle…

view full answer...

Answer 7

Hi Bill; the EcoHitch Hidden Trailer Hitch Receiver #EH98SR is exactly what you're looking for. This is confirmed to fit your 2025 Tucson and has an alloy construction made of recycled materials combining aluminum, steel, and stainless steel.…

view full answer...

Answer 8

For mud flaps on your 2022 Ram 3500 I recommend the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT110108-120108. These mud flaps are a custom fit and feature a no drill installation using "Quick-Turn"…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Trailer Hitch for 2027 Hyundai Tucson

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching