What Roof Rack and Rooftop Cargo Box do I Need for My 2019 Honda Fit?
Updated 07/28/2026 | Published 07/21/2026 >
Products Featured in This Question
Question:
Would the INBRM660BK fit a 2019 Honda Fit EX with Yakima Baseline FX crossbars? Thanks!
asked by: Mike
Expert Reply:
Hello Mike,
Welcome to etrailer, I'm glad you found us!
Since you have the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 # Y32ZD on your 2019 Honda Fit EX, the Inno Wedge 660 Rooftop Cargo Box - 11 cu ft - Gloss Black # INBRM660BK will fit your crossbars just fine.
I also attached a picture of this exact cargo box installed on a Porsche. If it looks right at home on a Porsche, it will have no problem on your Honda Fit. The low-profile design looks great on smaller vehicles while still giving you plenty of extra cargo space.
I also attached a hatch clearance image for reference. To ensure you have full use of your rear hatch, you'll want to measure from the center of the front crossbar to the line where the roof and hatch meet. That measurement needs to be at least 48-1/2". Please see the attached image for a visual reference.
What do you plan on using the roof box for? Mine comes in handy when I go camping, never enough room in my car for all my gear =)

Matt
7/28/2026
The clamps that come with the box are very easily adjustable to several different positions. You can pretty much have them at any distance apart. I put aftermarket cross bars on my VW wagon and didn't think to have them spaced out correctly and was able to make the adjustment on the box itself. The box has been on my car for over 2 years straight and not had any issues with it at all. Carried 5 snowboards in it several times. Highly recommend it. Also, bugs don't stick to it very easily, easy to clean.

Product Page this Question was Asked From
Inno Wedge 660 Rooftop Cargo Box - 11 cu ft - Gloss Black
- Roof Box
- Aero Bars
- Factory Bars
- Round Bars
- Square Bars
- Long Length
- Low Profile
- Medium Capacity
- Dual Side Access
- Black
- Inno
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Inno Wedge 660 Rooftop Cargo Box - 11 cu ft - Gloss Black
- Q&A: Can a Yakima SkyBox NX Skinny and FrontLoader Fit on the Same Roof Rack?
- Q&A: Can Thule Caprock Adapter Kit Work with Inno Cargo Box and Prinsu Pro Rack
- Q&A: Will an Inno Wedge Fit on a 2011 Toyota RAV4
- Q&A: Differences Between Inno Shadow 15 and Inno Wedge 660 Roof Cargo Boxes
- Q&A: Low Profile Roof Rack And Ski Carrier For 2025 GMC Yukon Denali
- Q&A: What Crossbar Spreads will the Yakima RocketBox Pro 14 # Y07192 Fit
- Q&A: Will the Yakima RocketBox Pro # Y07192 Fit My 2020 Mazda CX-5?
- Article: Rooftop Cargo Carriers
- Article: How to Install a Roof Rack
- Article: Roof Rack Information
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Tie Down Skis and Snowboards to a Roof Rack
- Article: Trailer Lighting Requirements
- Article: Must-Have Flat Towing Components





Jm
7/28/2026
Absolutely will fit. In fact, based on the design of the box’s “arms” that tighten around the cars’ crossbars, i cannot imagine any bar (cross) that would not be accessible. This box design should be at the top of the list of all! For what it is worth, i also find this box to be a tad more ridged in terms of its torsional strength. Meaning, it doesn’t “bounce” as much as most other boxes seen driving highway speeds have.