Looking for Pre-Greased Trailer Hub that Has Bearings L44649 and 5 on 4.5 inch Bolt Pattern

Updated 07/27/2026 | Published 07/19/2026

Question:

I have a trailer that I was wondering if you could match up the hub and bearing assembly pre greased. I could just buy the bearings and races and seal. The shaft isnt tapered at all. The bearing that are in it are L44649 outer diameter is approximately 2 inches. The inner is 1 1/4. Need races and seals as well. The trailer is only one axle. The hubs are 5x4.5. Thanks

asked by: Luke C

Expert Reply:

Hey Luke, thanks for all of the info you mentioned. Knowing what your bearing numbers are and your bolt pattern makes it easy to pick out the correct replacement hub that is pre-greased. You would want the part # AKIHUB-545-2-LF-2K which matches your bearing numbers and wheel bolt pattern and is pre-greased so it's ready to be installed and get you back on the road. What kind of trailer do you have?

expert reply by: Jameson C

Luke C.

7/23/2026

Theres no telling the brand

John H.

7/24/2026

I installed these on my boat trailer. Very easy. Took me longer to get them out of the box than install them. Just returned from a11 mile trip and they road great