Flat Towing 2016 Jeep Wrangler with Existing Snow Plow Mount

Question

Question:

I have a SnoWay snow plow frame on the front of my 2016 wrangler sport. What base plate and or tow system will work with this setup. Looking at the installation photos it appears the both frames use the same holes and locations when mounted. I really dont want to be swapping mounts as I will probably be using the plow more than I will be towing as I live in snow country in NY. What would I need for a complete package deal?

asked by: James B

0

Expert Reply:

Hey James,

Thanks for your question. Unfortunately, there aren't any custom-fit base plate kits that are designed to work alongside an existing Sno-Way snow plow mount. As you mentioned, both systems use the same mounting locations on the frame, so they can't be installed at the same time.

One alternative is a universal base plate kit, such as the Blue Ox Universal Bolt-On Base Plate Brackets - 5,000 lbs # BX88230. These brackets mount to a flat steel section of the bumper and are rated for 5,000 lbs. They're compatible with Blue Ox tow bars, such as the Blue Ox Alpha 2 # BX7420. Keep in mind that universal base plates typically require reinforcing or modifying the bumper, since they aren't attached directly to the vehicle's frame like a custom-fit base plate.

If you'd like to go this route, I'd be happy to help you select the remaining flat towing components to complete your Jeep's setup.

Do you already have some of your flat tow components or are you starting your flat towing setup from scratch?

expert reply by: Christopher H

0

James B.

7/22/2026

I don't have any flat tow components but since I would have to reinforce the bumper I am considering a replacement bumper with tow mounts. Still not completely sure I want to tow or trailer with the cost of the brake actuator for the jeep and not knowing how often or how far I would taking my jeep. Thank you for your response.

Christopher H.

7/22/2026

@JamesB Trailering the Jeep is not something many folks consider but it's definitely a good option for your situation. I wouldn't be able to help you with bumper itself, but if you do end up going that route let us know and we can help get you setup.

Bill

7/23/2026

One option would be a tow dolly. I bought a used one for under $1k. It is a bit more work than flat tow but easier to store at home or a campground than a car trailer. Actually I would like to sell mine since I went flat tow.

Christopher H.

7/23/2026

@Bill A tow dolly is a good thought and will work for some vehicles. Jeep Wranglers that are 4WD have to be towed with four wheels down to avoid damaging the transmission.

Bill

7/23/2026

@ChristopherH A Wrangler can be towed with 4 wheels or the two rear wheels down. In addition a tow dolly will let you tow any FWD car. I have done both with my 2016 Wrangler Unlimited. Flat tow is just easier so I upgraded. Transfer case in N. I have a 6 speed so it goes in 3rd gear to keep the trans lubed but on an automatic I believe neutral is the procedure. The owner’s manual has the information. Another advantage is you can use your Wrangler to tow using the dolly.

Answer 1

I may have another option for you. But the etrailer Invisible Base Plate Kit #e98948 will not work for your 2022 Jeep Wrangler Rubicon with aftermarket winch bumper. Currently the only option that may work for you (depending on your bumper) is the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Flat Towing 2016 Jeep Wrangler with Existing Snow Plow Mount

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching