Can I Replace the 2 Inch Ball on an Andersen 3302 Weight Distribution Hitch with a 2 5/16 Inch Ball?

Updated 07/21/2026 | Published 07/16/2026

Question:

I have an Anderson WDH model 3302. 2” ball with 6” . I need to replace the ball with a 2 5/16. Will this work. Is there a proper replacement. Thank you

asked by: Michael

Expert Reply:

Hi Michael! Yes, you can replace the 2 inch ball on your Andersen Weight Distribution Hitch, Model 3302, with the Replacement 2 5/16 inch Weight Distribution Ball, Part # AN23VR, but there's one important thing to check first. If your hitch was manufactured after October 2016 and has the newer silver zinc plated tension plate underneath the ball housing, the replacement ball will fit. If it's an older hitch with the original black powder coated tension plate, the new ball is not compatible, and you'll need to upgrade the entire ball housing assembly instead.

The easiest way to tell is by looking at the tension plate under the hitch ball. If it's silver, you're good to go with Part # AN23VR. If it's black, let me know, and I'll help you find the correct upgrade for your hitch.

Out of curiosity, what are you planning to tow that requires the 2 5/16 inch ball, a new camper or a piece of equipment?

expert reply by: Heather A