Looking For Front And Rear Suspension Enhancement For 2011 Workhorse W62 Chassis
Updated 07/21/2026 | Published 07/16/2026 >
Products Featured in This Question
Question:
We have a customer that needs suspension upgrade on a 2011 Workhorse W62 ? Its been converted to a food truck. The steer axle weight is 5940 lbs and the drive axle weight is 11960. Would the timbren rear suspension part TGMRP30 and the front suspension part TWFRW22. Will these parts work for the weight they have or is there a better product that will work better ?
asked by: Juan M
Expert Reply:
Hey Juan, thanks for reaching out. Based on the axle weights, I think the Timbren # TWFRW22 is a good choice for the front of your 2011 Workhorse W62. With 5,940 lbs on the steer axle, it's well suited to help reduce front-end sag, body roll, and bottoming out without changing the ride height. Where things get tricky is the rear. Even though the # TGMRP30 has the capacity to handle the weight, Timbren only lists it for the W20 and W42 chassis, not the W62, so I can't recommend it as a confirmed fit.
The W62 uses a heavier-duty rear suspension than the W42, and Timbren hasn't validated a custom rear kit for that chassis. If you're looking to add rear suspension support, I'd recommend reaching out to Timbren directly to see if they have a universal kit they recommend for the W62.
Unfortunately, we don't offer any other rear suspension enhancement for the W62 chassis at this time.
Product Page this Question was Asked From
Timbren Front Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Extra Heavy Duty
- Front Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Are There Air Bags for a 2002 Workhorse P42 Chassis
- Q&A: Rear Suspension Kit that Fits 2007 Workhorse W42 Chassis
- Article: What Is a Supplemental Braking System?
- Q&A: Tow Bar And Base Plate For A 2024 Jeep Wrangler Unlimited Rubicon
- Q&A: Recommended Suspension Enhancement for a 2006 Workhorse W42
- Q&A: Will SumoSprings and Air Lift Kit Fit Together on the Front of a 2008 Winnebago
- Q&A: Will SumoSprings Helper Springs # SSF-280-47 fit 2004 W22 Workhorse Holiday Rambler w Leaf Springs
- Q&A: Will Roadmaster Spare Tire Carrier Work With Motorhome and Bike Rack
- Article: Converting Your RV Water Heater to Tankless
- Article: Flat Towing Package for 2019 Jeep Cherokee



Keith N.
7/21/2026
These were a relatively inexpensive and highly effective way to help with front spring sag on our Monaco coach. The ride was noticeably better than before, and raised the suspension about an inch. I later went on to add for airbags to the front suspension but kept these in place as a feel safe.