What Trailer Jack Can Replace a Bulldog 151110?
Updated 07/09/2026 | Published 07/03/2026
Products Featured in This Question
Question:
I bought boat trailer that has this mounting plate. Outer diameter of center tube with snap ring grove on outside is 2-1/2 inches. The locking pin holes are 3 inches center to center both vertically and horizontally. Pin holes are 3/8 inches diameter but could be drilled to accommodate bigger locking pin if needed. Would prefer side handle if possible. Will Bulldog 151110 jack fit my mount? Are there any other options even if top winder?
asked by: Ken R
Expert Reply:
Hi Ken,
The company that owned Bulldog went out of business early this year so we no longer have Bulldog brand items available on the site. The most similar jack I could find compared to the Bulldog 151110 is the Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack part # DL22683. It's rated for 2,000lb capacity, has 15" travel range, and the standard 2 1/2" snap ring mount with a top wind crank. The overall bracket height is 14 3/4" tall, I'm unsure of the spacing between the mounting holes, but brackets are usually not interchangeable between brands so you may need to remove the old bracket and weld a new one on to replace the jack.
Do you know what the brand of the jack was that came with the trailer?
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Plug And Play Brake Controller For A 2023 Ford Explorer XLT With Towing Package
- Q&A: Will the Dexstar AM20242 13 Inch Wheel Fit a 12 Inch Trailer Hub?
- Shop: Brake Controller
- Search Results: redarc tow~pro elite
- Search Results: boat trailer bearing kits
- Search Results: boat trailer bearings
- Search Results: snap ring
- Q&A: Will CE Smith Y-Style Bow Stop Work as Replacement for Roller With 1/2" Shaft
- Shop: Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races
- Shop: Yates Spool Roller for Boat Trailers - TPR - 5" Long - 1/2" Shaft
- Q&A: Replacement Foot for Swing Trailer Jack with 1-3/4" Inner Diameter Tube
- Q&A: Recommended Jack Pad For a Fulton Jack With 6" Wheel
- Shop: Trailer Jack Weld-On Swivel Bracket for Dutton-Lainson Jacks with a 3/8" Pin and Snap Ring
- Shop: Dutton-Lainson Pull Pin Swivel Trailer Jack w/ Foot - Topwind - 15" Lift - 2,000 lbs
- Shop: REPL Snap Ring for Swivel Trailer Jacks - 2-5/16" Inner Diameter
- Shop: Redarc Tow-Pro Elite Brake Controller w/ Custom Harness - Dash Knob - Off-Road Mode - Up to 3 Axles
- Shop: CE Smith Y-Style Bow Stop for Boat Trailers - PVC - 4-1/4" Span - 1/2" Shaft - Amber
- Q&A: Trailer Jacks Manufactured in the USA
- Q&A: Replacement Snap Ring Trailer Jacks for Already Welded Mount
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer wiring
- Shop: Trailer Wiring
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Video: What to Know About the Curt TriFlex NEXT Trailer Brake Controller
- Shop: Suspension Enhancement
on Trailer Jack
Chris M.
7/9/2026
Ken, I installed this jack on my eagle trailer. Works great! Fit right onto the original bracket. Didn’t need to do any welding at all. Hope this helps. Chris M