Do You Have a Wheel Stud that is 1/2" by 1 3/16" for My 1991 Yacht Club Boat Trailer?

Updated 06/30/2026 | Published 06/25/2026

Products Featured in This Question

Replacement Trailer Hub Wheel Stud - Drive-In - 1/2" x 1-1/2" - Qty 1

(8)

$10.46

Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)

(31)

$18.54

Question:

I am tryig to find lug bolts for a 1991 Yacht Club boat trailer. They appear to be 1/2 by 1 3/16. Do you carry anything like this?

asked by: Jeff T

Expert Reply:

Hello Jeff,

I am kind of hoping that is a typo and you really meant 1-13/16".

If so, then you'll want the Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty. 4) # RG03-040. That's a much more common length for a 1/2" wheel stud, which is why I wanted to double-check before pointing you in the right direction. The length of the stud is important, so I just want to make sure you end up with the correct replacement. I attached an image of the dimensions.

If you really did mean 1-3/16", then I'm sorry, but we don't have anything that matches those dimensions. I even did some digging to see if I could find one from another source and came up empty.

If you have the stud out already, I'd double-check the measurement from the bottom of the head to the end of the threads. If you can also send me a picture of the hub or any numbers you find stamped on it, I'd be happy to take a look and see if we can identify it.

Did you just pick up this trailer and are fixing it up, or is this just some routine maintenance? Sometimes those older trailers can be a little tricky when it comes to finding replacement parts.

expert reply by: Kate F