Replacement Hubs and Brakes for 2021 Keystone Montana High Country
Updated 07/03/2026 | Published 06/25/2026 >
Products Featured in This Question
Question:
Hello I have a 2021 keystone Montana high country. I would like to replace hub and bearing assembly. Along with drum brakes. My axles are Dexter 651773 7k nev-r-adjust. I can send pictures if needed for more info but would like to order correct parts the first time. I appreciate the help thanks
asked by: John C
Expert Reply:
Hey John! For a replacement hub and drum assembly you can use the Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ you were looking at. Then for brakes you need the Dexter Nev-R-Adjust Electric Trailer Brakes # 23-464-465.
Where are you headed once you get the drums and brakes replaced on your Montana?

Troy C.
7/1/2026
Great product and easy installation. I changed mine last year before our annual trip to Florida.

D. T.
7/3/2026
Good product.. I like that bearings, races, and lube is ready to go right out of the box. I put this hub on a 20' equipment trailer. I have roughly around 300 miles on it so far without any issues. I did have two problems with assembly though. One, the spacing on length from back of hub to front was slightly different than old hub. This put the axle nut, and the old axle nut, in a position that wouldn't line up with cotter pin hole. I end up having to use a thin washer instead of the washer provided. Secondly, I could NOT get the new dust cap on. And yes I tapped lightly all the way around, I've done many caps before. I ended up using old cap. I emailed e-trailer in review about possibly sending new cap, with no return response. Would i buy again? Yes, I do like the performance of this hub.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Trailer Hubs and Drums
- Hub with Drum
- EZ Lube
- Pre-Greased
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Article: Trailer Wiring Diagrams
- Q&A: What Is The Difference Between 7K Hub/Drums From etrailer And Dexter?
- Q&A: Correct Bearing Kit for a 7,000 lbs Dexter Axle
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: Replacement Brakes for Dexter 023-327-00 and 023-326-00 on 5th Wheel
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: Replacement Brake Shoes and Drums for a 2013 Keystone Montana Mountaineer with Dexter 7K Axles
- Q&A: Replacement Brakes for 2021 Keystone 5th Wheel With 7k Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Fix a Bad Trailer Ground
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)



John C.
6/30/2026
Thank you. After Maryland we are headed to South Dakota