Replacement Legs for Reese 16K M5 5th Wheel Hitch that fit a Ford and GM Factory Puck System
Updated 06/06/2026 | Published 05/29/2026 >
Products Featured in This Question
Question:
We purchased a 5th wheel camper and the seller gave me his Reese 16k 5th wheel hitch. However, its an OEM, his truck came that way from the factory. I have a 2016 Ford F250 Super Duty. Is the frame hardware available and if so, can you share the cost, installed and just the hardware? Thank you
asked by: Meredith V
Expert Reply:
Hey Meredith congrats on the new 5th wheel trailer. The Replacement Legs item # RP83KR are the only replacement legs we carry for a Reese 16K M5 5th Wheel Hitch. They work exclusively with the Reese M5 part number 30971 hitch. These legs are going to attach directly to the Ford factory puck system. I attached a picture of them below so you can compare them to the legs on your new Reese 16k.
Do you have any part numbers for your Reese hitch? They'll be located on the head, center section, and legs. Those would help me narrow down which one you have so I can get you the correct legs. Also do you have the factory puck system, or a B&W gooseneck with a square receiver in your F-250, or are you looking to install 5th wheel rails and brackets? I need to know how your trucks set up so I can get you the right parts.
You can add this information, along with any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
Replacement Legs for Reese 16K M5 5th Wheel Trailer Hitch for Ford, Chevrolet, and GM
- Accessories and Parts
- 5th Wheel Hitch
- Legs
- M5
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended 5th Wheel Hitch for use w/ a Turning Point Pin Box and the Ford Factory Puck System
- Q&A: Best 5th Wheel Hitch That Works With The Lippert Turning Point Pin Box
- Q&A: Comparing Curt A16 and Q16 Fifth Wheel Hitches
- Q&A: Replacement Awning Fabric For A Solera RV Awning Part # V000315205
- Q&A: Overview of the Three Types of 5th Wheel Hitch Jaw Mechanisms
- Q&A: Maintenance Schedule for Lippert Turning Point Pin Box
- Article: Trailer Wiring Diagrams
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)



Meredith A.
6/5/2026
Hey Jerred, Thanks for getting back with me. He giving me the Reese 16k 5th wheel hitch. What I don't have is the puck setup for the bed of my truck. This guy has a nice 2014 F350 SD that came with the OEM system installed. He also has a 2004 F350 SD and he installed the puck setup in that truck. Is that bed setup still available for my 2016 F250 SD and if available, do you have a cost? He did share that he removed his truck bed to install it! Thanks, Meredith