Looking for 50 amp to 30 amp Power Cord Adapter that is Longer than Dogbone

Question

Question:

Do you sell this plug in a longer length? Looking for a 10foot or 15foot we camp at a site that only has 30 amp service and my RV is 50amp. I do not want to use a dog bone.

asked by: Pete

0

Expert Reply:

Hey Pete, we have what you are looking for in a 25 foot length with the part # A10-3050EDBK but we don't have anything shorter than that. Would 25 feet work?

expert reply by: Jameson C

0

Pete

5/14/2026

I want the rv 50 amp plug to be 90 degree.

Jameson C.

5/14/2026

@Pete Best solution for that would require two parts if you'd be open to that. You'd need the part # A10-3015EH and then the part # A10-3050D90VP for the conversion to 50 amp.

Answer 1

Hey Pete, you do not need a wedge. The wedge part #PUL86RR is the correct wedge to use with both the Lippert Turning Point and a Pullrite but since you have the 1900 which is a fixed hitch you wouldn't use a wedge at all.

view full answer...

Answer 2

Since your 2022 Grand Design Reflection Series 280RS has a Lippert Turning Point pin box you can use a fixed hitch will weigh less than a slider hitch. So the lightest weight and easiest to use hitch would be the Demco Recon part #DM8550043 which…

view full answer...

Answer 3

Hi Brian! I would not try to repair a 14 year old AC. It is typically more cost effective to replace the system, and you may not even be able to get parts depending on what went wrong. R410A units have been phased out as of last year because of EPA…

view full answer...

Answer 4

The Camco Power Grip 90-Degree Locking Electrical Adapter #CAM55582 is exactly what you're looking for. This has a 50 amp female plug with the twist lock and a 30 amp male on the other end.

view full answer...

Answer 5

Hi Greg, For your 2026 Jayco Eagle 25 RUC with the Lippert Rhino pin box, I recommend the MORryde GooseTech 5th Wheel to Gooseneck Pin Box for Trailers Under 11.5K Part #MR64MV. It replaces your factory Rhino pin box with a premium gooseneck…

view full answer...

Answer 6

Hi Clint! The Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box - Lippert Rhino - 30K GTW - 6.5K TW #GY37ND weighs just under 100 pounds. It is possible to get this installed by yourself, but a lift of some sort is going to be a necessity. Unless you…

view full answer...

Answer 7

The 15,000 Btu Furrion Chill HE AC like the part #FR23PV does indeed have a start capacitor. In regard to the starting power needed, I reached out to Furrion, who told me the 15,000 Btu Chill AC's require 30 amps and 2,500 starting watts. So that…

view full answer...

Answer 8

Thanks for your question, Eddie. The short answer is yea, you can install the Pacbrake air bags with on board air compressor and 2-1/2 gallon tank, part #PB77SV. However, there are a few things to keep in mind. Since your truck is equipped with the…

view full answer...

Answer 9

Welcome back Charles. The Gen-Y Nomad 5th item #GY37ND mounting bolts need to be torqued to 160 ft-lbs. If you are in need of replacement bolts, I recommend the The Installation Bolt Kit for 5th Wheel Pin Boxes and 5th Wheel to Gooseneck Adapters…

view full answer...

Answer 10

Hey Sam! This is a perfect example of where simpler is often better, especially in a van build. If you’re running a 12V system, the Victron Phoenix 1,000w 12v inverter #VN55ZR is a great, straightforward option. If you’re going 24V for efficiency,…

view full answer...

Looking for 50 amp to 30 amp Power Cord Adapter that is Longer than Dogbone

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching