Recommended Weight Distribution System For Lance 1575 Trailer With 600 Lbs Tongue Weight

Question

Question:

I have a Lance 1575 TT and want a trunion style WDH but the A-frame on the 1575 is tapered, measuring 3inch vertically nearest to coupler, to 5inch near body of trailer. Although Id prefer a WDH utilizing link plates as opposed to snap-ups, the differing frame dimensions could present a mounting problem. Im looking for a WDH with a tongue rating of 600 lb. Which WDHs would you recommend?

asked by: Neils F

0

Expert Reply:

For your Lance 1575 Trailer, I recommend the Curt Weight Trunnion Style Weight Distribution System with Shank, part # 17301. This is a trunnion style system that can work with a trailer with up to 800 lbs tongue weight. This system comes with the shank that fits 2 inch receivers and has a maximum rise of 6 inches to the maximum drop of 2 inches. since the brackets slip over the top of the frame, you should have no problem attaching the brackets that the chains attach to.

I have attached a helpful article that explains weight distribution you can check out.

expert reply by: Jeffrey L

0

Answer 1

Are you asking about a slide out awning/topper or an actual cover? I am going to assume you mean topper since that's a common thing people look for. We don't have the dimensions of what your Lance would have but here are a few common options:…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 6

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Answer 7

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

view full answer...

Answer 8

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Recommended Weight Distribution System For Lance 1575 Trailer With 600 Lbs Tongue Weight

Featured Help Information

Miscellaneous Media

Continue Researching