Replacement for Coach Step 725-0042 On 2005 Monaco Knight
Updated 05/08/2026 | Published 05/02/2026 >
Products Featured in This Question
Question:
I have a 2005 Monaco knight motor home and need to replace the electric steps. The old one has a part 725-0042 from coach steps what Kwikee step do I need it is a 2 step model. Thanks Kenny Rea
asked by: Kenny R
0
Expert Reply:
Hey Kenny! Thank you for providing that part number. The correct replacement is the Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps - 32 Series - 24" Wide # LC3722617.
Where are you headed with the Monaco once you get the steps replaced?
expert reply by:
Robin H
0
Product Page this Question was Asked From
Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps - 32 Series - 24" Wide
- RV Steps
- Motorhome
- Electric Step
- 24 Inch Wide Step
- 23-3/4 Inch Wide
- 2 Steps
- 8 Inch Drop/Rise
- Steel
- Kwikee
more information >
Continue Researching
- Q&A: Replacement Step for Coach Step for RV Part Number 725-0042
- Q&A: Replacement Electric Steps for a 24" Wide Kwikee 32 Series Steps
- Q&A: Replacement For Kwikee Control Module 1510000140
- Q&A: Correct Replacement for Kwikee Steps 903206000
- Q&A: 2005 Holiday Rambler Replacement Double Step Recommendation
- Q&A: Will MORryde StepAbove RV Steps Fit Motorhome With 20" Entry Height
- Q&A: Kwikee Replacement Steps Recommendation for a 2021 Entegra Coach Esteem Motorhome
- Article: How to Measure for Motorhome Steps
- Article: Flat Towing Package for 2014-2018 Jeep Cherokee
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Must-Have Flat Towing Components
- Article: What Is a Supplemental Braking System?
- Article: 5 Reasons to Convert Your RV Lights to LEDs Today
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices



Kenny R.
5/8/2026
Thanks for your reply. My original steps are in good shape. I was told that usually the electric motor was the problem. So I ordered a new one but when I removed the original motor it worked ok but the Allen head bolt that held the big gear plate to the step mounting plate fell out on the ground. It appears the bolt has broken. There are no treads on the end of the bolt. If I am correct is there a way to order just the bolt and replace it. Other than that the steps look ok and the steps swing freely. I would buy a new gear plate and bolt if you can help solve my problem. Thanks Kenny Rea