Replacement Grease Seal for 1984 Shoreline Trailer
Updated 04/13/2026 | Published 04/06/2026 >
Question:
Hi, I need a double lip grease seal for a 1984 shorelines trailer. The dimensions are OD:2.33inch X ID:1.500inch x .25inch thick. Of theres such a grease seal Please provide the part number. Thanks you
asked by: Kimbo
0
Expert Reply:
Hey Kimbo! There is such a grease seal. You can use the CE Smith Grease Seals for 1-1/4" Straight Spindles # CES32QR as a replacement. These grease seals match your 1.5" inner and 2.33" outer diameter measurement.
What kind of boat do you have?
expert reply by:
Robin H
0
Product Page this Question was Asked From
CE Smith Grease Seals - I.D. 1.500: / O.D. 2.328" for 1-1/4" Straight Spindles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.50 Inch I.D.
- 2.33 Inch O.D.
- CE Smith
more information >
Continue Researching
- Q&A: Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Does Trailer Hub Without Spindle Washer Need to Have One Installed
- Q&A: Double Lip Grease Seals to Replace Transcom Seal 12192TB
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: Replacement Hub for a Malone LowBed MicroSport Trailer MAL25FR
- Q&A: Replacement Hub for a Malone EcoLight Sport Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The Best Boat Bumpers


