bing tracking image
Q & A Icon

MORryde GooseTech For A 2024 Dutchmen Voltage 4225  

Updated 03/18/2026 | Published 03/10/2026

Question:

I have a 2024 voltage 4225. I was curious what I will need to be able to make that switch/ convert it over from a 5th wheel to this. Thank you

0

Expert Reply:

Hi Daniel!

To make the swap to the MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 18K+ Trailers w/ Lippert Rhino # MR24MV, you will need to know which pin box you currently have. I looked around but was unable to find that info anywhere, unfortunately.

If you have the Rhino Box, you are good to go with this one. If you find that you have a different one (you may need to contact Dutchman with your VIN to know for sure), let me know what you have and I can find the correct one for you.

Don't forget to also grab the # MR23MV safety chains. They are required when swapping to one of these.

Are you getting ready for a trip or just wanting to get away from a 5th wheel hitch?

expert reply by:
0
Lazer S
Daniel N. profile picture

Daniel N.

3/18/2026

hitch/coupler is LCI 1621SHD 21K This is what they sent me on what my pin box is. What is the best one for a goose neck to switch too?

Lazer S. profile picture
Etrailer Expert

Lazer S.

3/18/2026

@DanielN Perfect! What you are going to want is the MORryde GooseTech # MR47MV. This will fit that 1621 pin box you have and has an optimal spring capacity for trailers over 18,000 pounds (and up to 24,000 pounds). It's heavy (175 pounds), but it will bolt right up to your frame and you are good to go!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>