Finding a Place to Pick Up Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension

Question

Question:

Pick up in ft worth TX?

asked by: Jerry G

0

Expert Reply:

Hey Jerry, I attached a link below that will take you to a page where you can find a local shop to you where you could pick up the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems # MR96UR.

expert reply by: Jameson C

0

Jameson C.

12/29/2025

Hey Jerry, were you able to find a local shop in Fort Worth that had the replacement rubber shear spring available? Knowing what worked could help someone else looking for a nearby pickup option.

Answer 1

Hi Justin, Appreciate the photo and you do have it right; that's a #75 spring so the correct replacement is indeed the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems #MR96UR.

view full answer...

Answer 2

Hey Paul, You most likely could still pull the trailer if you really needed to even though the shear spring #MR35UR needs to be replaced, I just would make it a short trip and get it swapped out. A bad shear spring can lead to a rough ride quality…

view full answer...

Answer 3

Hello Justin, I reached out to MORryde for you regarding the torque of the Replacement #75 Rubber Shear Spring #MR96UR, and they sent me the following diagram, saying "here are all of the bolts and torque specs for the RL suspension system…

view full answer...

Answer 4

We do a couple replacement shear springs available for you that may work depending on what you're needing. For instance, we do carry the Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension Systems #MR96UR, which will work…

view full answer...

Answer 5

While I have no way to look up what rubber shear springs you have on your 2013 Keystone Montana 3582RL here are the ones we currently carry you can compare yours to. Replacement #20 Rubber Shear Spring #MR79UR Replacement #75 Rubber Shear Spring…

view full answer...

Answer 6

Hello Sue, Thank you so much for the pictures, they are always so helpful! I apologize for the delay in getting an answer, but I needed to get the correct shear spring added to our site. To replace your #7 shear spring you will want the Replacement…

view full answer...

Answer 7

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 8

Hi Jeff, great question, and you’re definitely on the right. I know how tiring it can be when the RV feels like it’s leaning or getting pushed around, especially in wind or on curves. The Timbren kit part #TFER35092LB is a solid upgrade if you’re…

view full answer...

Answer 9

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 10

I was able to find the 126003 hub and was able to determine that it is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern just like the #AKHD-545-35-K that you referenced. This hub will work as a replacement for your Lippert.

view full answer...

Finding a Place to Pick Up Replacement #75 Rubber Shear Spring for MORryde Trailer and RV Suspension

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching