Trailer Suspension Kit that Has Flat Center Equalizer
Updated 12/01/2025 | Published 10/29/2025 >
Question:
I am building a tandem axle trailer. I have 2 Dexter 3inch axle tube s/n 131152901 5200 pound rated axles with Dexter 072-097-00 double eyed springs. Ive on welded on some spring perches all ready to mount the springs below the axle. Please direct me to what package I can purchase that utilizes a Flat equalizer, along with hanger brackets, shackle links and bolt and nuts. Thanks for your assistance
asked by: Cb
Expert Reply:
Hey Cb, we have a flat equalizer hanger kit with the part # APT1 which you can use with your current axle setup. This includes also hangers, shackles, and bolts like you'd need.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Continue Researching
- Q&A: What Direction Should The Band on a Leaf Springs Be Faceing
- Q&A: Hubs To Replace Damaged Hubs With Obsolete LM48548 and L44649 Bearing Combination
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Q&A: Specs for the EMCO 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long EM26AJ
- Q&A: Replacement Inner Member for a Dexter Model A60/A75/XR84 Brake Actuator
- Q&A: Replacement Suspension Components for Anvil 8.5 ft by 20 ft Trailer
- Q&A: Hanger Distance for Installing 25-1/2 inch Leaf Springs with Hanger Kit # APT8
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


Jameson C.
12/1/2025
Hey Cb, how did the flat equalizer hanger kit work out with your tandem axle setup? It sounds like it had all the parts you needed for your springs and perches. Sharing how it went could help others building a similar trailer.