Solar Panels for Charging BLUETTI AC200L in Travel Trailer

Question

Question:

I have a bluetti AC200l that I would like to charge with solar panels on my travel trailer...I would like the toughest most durable panels...would like to put on 4... 250 watt panels...so I would need 4 panels , a charge controller and what about a fuse of some type as well as wiring for hook up...your advice and recommendations with be very appreciated.. Thanks Chris Willson

asked by: Chris W

0

Expert Reply:

Hi Chris; rigid monocrystalline solar panels are going to be the most durable option for your travel trailer. For 250 watt panels you can use the Rich Solar Mega 250 Solar Panel # RS35FR (silver) or # RS95FR (black). You will also need to pick up the feet # RS82FR since they don't come with the panels. It looks like the Bluetti AC200L has a built-in MPPT solar charge controller so you can connect the panels directly without adding a separate charge controller. Make sure to verify this information.

I'm not entirely sure how you want to set this up but, assuming these are mounted on the roof and you're running cables down inside to the power station you're going to need an entry plate # 34273840. You will also need cables to run from the entry plate to the power station adapter like # RS62FR. These are 20' long, you can find longer ones if you need them or put some together. From what I saw in the Bluetti manual that adapter it comes with has MC4 connectors on the end so it will plug right into the cables.

With 4-panels I would pick up some 4 to 1 branch connectors (we don't carry them) and then you may need extra wiring if the cables on the panels can't reach far enough on the roof. If you want to add an inline fuse you can use the # RS44VR.

What kind of travel trailer do you have?

expert reply by: Robin H

0

Rich Solar Mega 250 Solar Panel
(click to enlarge)

Chris W.

10/27/2025

Thanks for you input, I'm still researching

Robin H.

10/27/2025

@ChrisW happy to help, let me know if you have any other questions.

Answer 1

You can likely find a replacement washer at your local hardware/home improvement store but if you're looking for complete new hardware you'll need to get the whole Universal Z-Mount Bracket Kit for Furrion Rooftop Solar Panels #FR44PR as…

view full answer...

Answer 2

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

view full answer...

Answer 3

Hey Kyle, welcome back! The B&W Companion OEM 5th Wheel Hitch item #BWRVK3600 you purchased is confirmed to fit the 2019 Ram 3500 with the factory puck system. I will make sure this gets to the right people so Untethered can get the credit!…

view full answer...

Answer 4

Hey Deven, thanks for reaching out, and good question. For a 12 volt system, the charge controller can handle one 200 watt panel. For 24v systems it can do two 200 watt panels. So while the kit technically is expandable, with your 12v system, the one…

view full answer...

Answer 5

Hey Daniel! That’s one of the benefits of these newer WFCO Auto-Detect panels. You won't need to replace anything again since they are compatible with lithium. The new models like #WF46FR, #WF86FR, and #WFC72GR all automatically detect lithium…

view full answer...

Answer 6

Good morning, Dana! Yes, you are in luck because the new models use WFCO’s Auto-Detect charging, making it compatible with: -Lead-acid (flooded and AGM) - 3-stage charging -Lithium - 2-stage charging up to 14.6V No switches. No settings. The…

view full answer...

Answer 7

Hey Ron! The etrailer Solar Expansion Kit #e72PR will work just as well as the #34282182 on your Jayco. There are a few differences in the specs but they're close enough it doesn't make a difference for this kind of setup. It is ok to mix…

view full answer...

Answer 8

Hey Mitch, Aside from your Nighthawk Tow Bar you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 Tow Bar Wiring Kit: Since you should already have the 7-way cable and 6-pole socket you should…

view full answer...

Answer 9

You can easily switch the orientation of the monitor on your Furrion camera system like part #FOS43TASF. If you press the "Menu" button on the side of your monitor you will then need to go to the "Setup" menu. In the Setup menu…

view full answer...

Answer 10

Hello Denny, I am sorry to hear there is issues with your current screen. Yes, you can swap out your 5" F0S05TASF for the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR. So are you saying that your 5"…

view full answer...

Solar Panels for Charging BLUETTI AC200L in Travel Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching