Are Spindle Replacements Available for 3,500 lb Trailer Axles
Updated 11/13/2025 | Published 10/18/2025
Products Featured in This Question
Question:
Im working on a boat trailer which has 2 3500 lb axles. One is galvanized and the other appear to be a replacement. Galvanized one has the axle drilled to grease. Measured 1.719 in seal surface. One is horrible shape. Black pipe one, can I just buy an end and weld it on? Is there any upgrades.. 4000 or 5000 lb upgrade. Seems like my boat is 6000 lbs, so it hard on bearing. Need a spare... and some boat bunk bracket to make it easier to load. Michael
asked by: Michael M
Expert Reply:
Hey Michael, yes you can replace just the spindles of your 3,500 lb axles like with the part # TRU74FR which also has the brake mounting flange as well. To weld it on you do need special jigs for this job so that you end up with the correct alignment.
For a bearing kit that fits a 3,500 lb axle we have the part # BK2-100 which includes spare bearings and a seal.
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- With Flange
- L68149
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Surge Brakes for Demco KK260 Tow Dolly
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Will The Kodiak Disc Brake Kit K2R35DKG Fit The etrailer Hub AKIHUB-545-35-G-K?
- Article: Trailer Wiring Diagrams
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Can Spindles be Replaced on Dexter Torflex Axle
- Q&A: Replacement Flush Valve for a Thetford 42072 Toilet
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: How To Measure And Replace Everything In Your Hub Assembly
Jameson C.
11/13/2025
Hey Michael, how did things go with replacing the spindle on your 3,500 lb axle? Did the new spindle and bearing kit line up the way you needed? Your update could make it easier for others working on similar boat trailer repairs.