Looking For A Lift Kit For A Lippert Axle 3300lbs
Updated 09/29/2025 | Published 09/13/2025
Products Featured in This Question
Question:
I need an axle lift kit for lippert axle part number LC135H - DTBSA - 89.5 - 59.25- ID - 220 - LPIB- L- 545- GAMR 3300 Serial number: 057 - 000265554
asked by: Ronn G
Expert Reply:
Hey Ronn,
We have a over-under conversion kit for different size axles. If your axle is 2-3/8" in diameter we have # K71-384-00 and for a 3" diameter axle we have the # K71-385-00. That is essentially flip your leaf springs to above your axle providing a lift that is the size of the axle + leaf springs, typically around 4-5". That is what I recommend on most trailers when needing a lift.
Did you have a certain amount of lift you were looking to gain?
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Raise Your Travel Trailer Height
- Q&A: Looking For Over-Under Kit For Dexter 2-3/8" Diameter Axle
- Q&A: How to Lift 2025 Keystone Coleman 17B
- Article: Trailer Wiring Diagrams
- Q&A: Adding Lift to 3,500 lb Trailer Axle
- Q&A: Recommended Roadmaster Comfort Ride System for a 5th Wheel Trailer w/ 4,400 lbs Axles
- Q&A: Lift Kit Options For A 2015 Winnebago Micro Minnie 1706FB
- Q&A: 2024 Forest River Wildwood X-Lite 273QBXL
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Nick S.
9/29/2025
Hey Ronn, did you have a certain amount of lift you were looking to gain with the over-under conversion kit? I'm asking because it could help others who are considering a similar upgrade for their trailers.