Looking To Replace My Trailer Axle That Is 64" Hub Face, Do You Carry A Replacement?
Updated 09/12/2025 | Published 08/18/2025
Question:
Good morning, I am replacing a torque axel. Of course bent spendals, the measure from hub to hub is 64 in. Wanting to use a 4 inch 35k axel. What length should I get to replace it. Of course a axel kit is in mind. Thanx Harry
asked by: Harry
Expert Reply:
Hey Harry,
The most important thing when replacing an axle is getting the exact same size as your original. If the hub face, or spring center measurements are off it could throw off the layout of your suspension and cause more issues. With your hub face measurement being 64" the closest we carry is a 60" hub face with a 48" spring center. We do not have an axle that is the same hub face measurement as yours. I would recommend reaching out to Dexter, they still make custom axles and will be able to get you the exact size you need. You will want to make sure you get your spring center measurement as well to get the correct size.
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: How Much Does The TA35ZR Taskmaster Modular Wheel Weigh?
- Q&A: Recommended Microwave To Replace Discontinued Dometic DOTR12CBIV
- Q&A: What Replacement Switch will Work with Ram Jack with a Kedu HY60D Switch
- Q&A: Replacement Toggle Switch For A Fastec FIC ETJ3500 Electric Jack
- Q&A: How To Find Replacement Hubs for Triton LT PWC Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Article: Tow Bar Wiring Overview
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Performance Chips and Modules
Nick S.
9/12/2025
Hey Harry, did you have a chance to reach out to Dexter for a custom axle? I'm eager to hear how it worked out for you, as it could help others in a similar situation.