What Size Hub Fits a 10" Wheel w/ a 5 on 4-1/2" Bolt Pattern?

Published 08/13/2025

Products Featured in This Question

Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E

(7209)

$140.27

Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased

(1706)

$95.35

Question:

on the wheel, what is the inside witth where the hub face would be? or what is the widest that the hub face can be to fit this wheel?

asked by: Wayne

Expert Reply:

The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item # AM3H490 will work with a hub up to 8" in diameter like the Easy Grease Trailer Hub and Drum Assembly for 2K Axles item # AKHD-545-2-EZ-2K.

The best way to determine the max wheel size would be to know the weight capacity of your axle. If you have a 2,000 lbs axle with a 5 on 4-1/2" bolt pattern then the recommended wheel size is between 8" and 12". If you have a 3,500 lb axle with a 5 on 4-1/2" bolt pattern then the recommended wheel size is between 13" and 15".

What capacity is your trailer's axle?

expert reply by: Jerred H

Wayne

8/13/2025

I don't have a trailer, I plan on getting one custom built. Do you have a hub assembly that will fit this wheel? I don't need a drum assembly.

Jerred H.

8/13/2025

@Wayne I sure do. The 5 on 4-1/2 CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles item # CE13215 will work with the Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item # AM3H490.