Height of Classic Accessories PolyPro III Deluxe RV Cover

Question

Question:

What is the height of this cover? We just bought a 2026 No Boundaries 19.2 with Beast Mode. Tall camper, almost 11 ft. Thanks!

asked by: Lisa M

0

Expert Reply:

Hi Lisa, congratulations on the new camper! The Classic Accessories PolyPro III Deluxe RV Cover # 052963731637 is 104" tall. Looking at the specs for your 2026 No Boundaries NB19.2 Beast Mode it is actually 21' 10" long so this isn't long enough anyway.

The Classic Accessories PolyPro III Deluxe RV Cover for Travel Trailers up to 22' Long # 052963732634 would be the better choice This is slightly taller at 118". That doesn't quite make it for full coverage of your 10' 11" height of the trailer but I think it is the best coverage you're going to find.

Any big trips planned with your new NoBo?

expert reply by: Robin H

0

Classic Accessories PolyPro III
(click to enlarge)

Robin H.

9/2/2025

Hi Lisa, have you had a chance to try out the RV cover for your NoBo? I'm curious to know how it worked for you since it might help others with similar campers.

Answer 1

Your dealer has you going in the right direction. With a measurement of 23 feet 8 inches from the rear bumper to the back of the propane tank cover you should select a cover with dimensions that your RV falls into. The PolyPro III Deluxe Travel…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Barry! That Adco Olefin HD you're referencing was discontinued. I recommend getting a Classic Accessories cover over the Adco anyway since they tend to hold up better over time. With that Florida sun the best option is the ProTop4 RV Cover…

view full answer...

Answer 4

For your utility trailer, there aren't specific covers made, however you can use a travel trailer cover for your application. I recommend the Adco Olefin HD RV Cover for Travel Trailers up to 18' - All Climate + Wind - Gray #AD37ZR or the…

view full answer...

Answer 5

For your application you need the Adco SFS AquaShed Cover for Bumper Pull Trailer #290-46004. This fits trailer boxes up to 16' long which it sounds like that's what you have. This is designed for horse trailers which have the V-Nose same as…

view full answer...

Answer 6

Hi Steve; did you measure that? Everything I'm looking at online indicates that the length of your 2023 Coleman Lantern 17B is 21' 5" which is quite a bit longer than what you listed in your question. If it is 18' 5" long then…

view full answer...

Answer 7

To determine the correct size RV storage cover for your Coleman Lantern LT Travel Trailer you'll need to measure the body length. In the attached picture below you'll see exactly how to measure. Once you have this measurement you can choose…

view full answer...

Answer 8

The length I'm seeing for a 2024 Grand Design Imagine XLS 17MKE is 21' 11" so if you subtracted 3' for the trailer tongue you'd be right at 18' 11" and would fall within the Adco AquaShed #290-52240's fitment.…

view full answer...

Answer 9

The Classic Accessories RV Wheel Covers #CA80098 contains 2 total covers. If you would like to cover all 4 tires on your trailer you would need to get 2 kits for a total of 4 covers. These Classic Accessories RV Covers fit RV tires 18-21 inches in…

view full answer...

Height of Classic Accessories PolyPro III Deluxe RV Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching