Replacement Hubs for a LoadRite Trailer w/ Tandem Axles
Updated 09/02/2025 | Published 06/18/2025
Question:
Im trying to find a hub kit with bearings, castle nut, and D-shaped washer for my trailer, but there are too many options. I am lost and need help. I know it is a LoadRite trailer 7000lb rated tandem axle, the axel is a 2 square tubing with a 2 ped spindle. I have all the measurements of the spindle I would be able to share my diagram in a gif format. The hub is a 5 on 4.5 it has a circled R stamped in it as well at H-1000. Can you help me figure out the parts I need?
asked by: Kenny M
Expert Reply:
Hey Kenny, thanks for all the information! If you could give me the dimensions in the diagram below marked C and D and also tell me what kind of a hub you're looking for; disc, idler, or drum I would be happy to find a replacement.
You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Recommended Microwave To Replace Discontinued Dometic DOTR12CBIV
- Q&A: Replacement Toggle Switch For A Fastec FIC ETJ3500 Electric Jack
- Q&A: What Replacement Switch will Work with Ram Jack with a Kedu HY60D Switch
- Q&A: Brake Bolt Pattern and Stub Diameter for #84 E-Z Lube Spindle for 3,500 lb Trailer Axles
- Q&A: Availability Of 5 On 5-1/2 Hubs For A 5.2K Or 6K Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Replacement LCI Solera Awning Manual Override Plug or Grommet
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Article: Where to Position the Trailer Axle?
- Article: Tow Bar Wiring Overview
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Performance Chips and Modules
Jerred H.
9/2/2025
Hey Kenny, did you have a chance to gather the dimensions for C and D on your diagram and decide if you need a disc, idler, or drum hub? I'm here to help you find the right parts for your trailer.