How Far Away From the Frame is the Shock Mounting Hole on the Lippert Bolt-On Shock Kit?
Updated 09/08/2025 | Published 06/04/2025
Question:
On the 3 inch axle shock bracket, what is the measurement from the back to the center of the shock stud hole? So how far does the mount stick out from the frame to where the shock goes in.
asked by: Michael W
Expert Reply:
Hey Michael. The shock hole in the upper mounting bracket sits 2-3/4" away from where the Lippert Bolt-On Shock Kit item # LC281281 attaches to your trailer's frame. Please note that you will need at least 4" of clearance between the I-beam flange and inside of the tire for this system to work.
What kind of trailer do you have?
Product Page this Question was Asked From
Lippert Bolt-On Shock Kit w/ Heavy Duty Gas Shocks - 5,200-lb to 7,000-lb (3") Overslung Axle
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- Single Axle
- Lippert
more information >
Continue Researching
- Q&A: How long are the Shackle Straps in the Dexter E-Z Flex Suspension Kit K71-653-00?
- Q&A: How to Install Lippert Bolt-On Shock Mount Kit with Heavy Duty Gas Shocks for 3 Inch Axles
- Q&A: Shock Kit for Travel Trailer Recommendation
- Article: Best Air Bag Suspension 2025
- Q&A: Will the Bolt-On Shock Kits for Trailers Work With Underslung Axles
- Q&A: Recommended Shock Absorbers On 5th Wheel Trailer For More Comfortable Towing Experience
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can Lippert Shock Kit Work on Trailer With Underslung Axles
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How To Install Lippert Anti-Billowing Kit for Solera Slide Topper Awnings
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: Spring Towing Readiness Checklist
- Article: Double-Eye Trailer Suspension System Review
Jerred H.
9/8/2025
Hey Michael, did you find the measurement information helpful for your trailer setup? I'm asking because I want to make sure you're on the right track and to help others with similar questions.