bing tracking image
Q & A Icon

How to Use Miro-Flex LED Trailer Light As Third Brake Light  

Updated 09/12/2025 | Published 05/22/2025

Question:

I would like to use the light as a 3rd high mount brake light on my Jeep Wrangler. Currently have one black and on white wire with a red stripe from the tailgate that went to the original high mount. How would I wire this up.

0

Expert Reply:

Hey Dallas! To use the Miro-Flex LED Trailer Light # STL22RB as a third brake light you're going to need the 3rd Brake Light Logic Module # PP20-702. This will filter out the turn signals so the light only activates when the brakes are applied. I do not have information on the wire colors for your Wrangler so it will be up to you to identify the correct tail light wires to tap into. If you aren't sure you can use a circuit tester like # PTW2993. I went ahead and attached a wiring diagram for your reference.

If you need anything else feel free to reach out in the comments below.

expert reply by:
0
Robin H
3rd Brake Light Logic Module Wiring Diagram
3rd Brake Light Logic Module Wiring Diagram
(click to enlarge)
Robin H. profile picture

Robin H.

9/12/2025

Hey Dallas, did you have a chance to wire up the Miro-Flex LED Trailer Light on your Wrangler using the 3rd Brake Light Logic Module? I'm curious to know how it worked out for you, as your experience could help others with similar setups.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>