bing tracking image
Q & A Icon

Could CE Smith Trailer Axle Fit Boat Trailer with 1/4 inch Difference in Spring Seats  

Updated 09/29/2025 | Published 05/06/2025

Question:

Looking to purchase an axel replacement for my boat trailer. Original axel measures spindle to spindle 63 inches, HF is 57 1/2 inches, spring center is 46 1/4 inches, axel is 1 1/2 inch square. Your axel closest to this size is 46 1/2 inch spring center as is all others I have located. There is a little side to side movement in the springs, do you know if your axel will fit my spring center or will I have to weld up holes and drill correct spacing. Further exactly what size is the drilled hole for spring center fitment. Its probably different than mine as well. Mine is 1/2 inch. Thanks for your response.

0

Expert Reply:

Hey Chuck, the part # CE33201GA-HUB is really close to what you need but if the springs seats are off by 1/4 inch you'd most likely have suspension components wearing out quicker than usual as the components would get bound up a little bit as the suspension moves. You might measure again and see if you happen to have been off by 1/4 inch.

Otherwise the hangers on your trailer would need to get moved or the hangers on the axle would need to get moved.

expert reply by:
0
Jameson C
Jameson C. profile picture
Etrailer Expert

Jameson C.

9/29/2025

Hey Chuck, did you have a chance to re-measure your spring center to see if it might be off by 1/4 inch? I'm curious to know if you found a solution that worked for your trailer, as it could help others facing similar challenges.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>