bing tracking image
Q & A Icon

Recommended Wiring Harness for a 2025 Kia Sorento EX Hybrid  

Updated 09/26/2025 | Published 05/05/2025

Question:

Hi, I have a 2025 Kia Sorento EX Hybrid which says it is pre-wired for the tow package. I cannot locate where the wiring is and which harness my vehicle would take to connect this. I have read several articles and there are differences between the LX/S models and the EX. Also, there is no mention of what to do when the vehicle is pre-wired. Can you shed some light on this? Thanks

0

Expert Reply:

Hey Mike! I saw your were looking at a 4-way connector. I checked with Curt and the correct one for your 2025 Kia Sorento EX Hybrid, is their T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C63RV. This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. This will provide you with a 4-way connector.

I have linked an installation video below that will show you where to find the connector. You can skip ahead to the 3:50 mark to see it.

If you don't already have a hitch, I recommend the Curt item # C37RV. This is a class III hitch with a 2" receiver. It is custom fit and bolts to your Kia with included hardware.

What kind of trailer are you towing and does it have brakes?

expert reply by:
0
Jerred H
Jerred H. profile picture

Jerred H.

9/26/2025

Hey Mike, did the T-Connector Vehicle Wiring Harness work out for your Kia Sorento EX Hybrid? I'm curious about your experience because it could help others with similar setups.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>