Suspension Upgrade Parts Needed for a 2021 Grand Design Reflection 31MB
Updated 04/30/2025 | Published 04/20/2025
Products Featured in This Question
Question:
Hi , I have a 2021 reflection 31mb and I am looking to upgrade my leaf springs to 6k . Seems to be there are multiple available and I am not sure which one to get . I also would like the morryde cre3000 with the wet bolts kits. Could you guide me in the right direction. Thank you.
asked by: Andre
Expert Reply:
Hey Andre, thanks for reaching out!
According to my research you need the MORryde CRE3000 Kit # MR27ZR and then either the 2-1/4" Shackle Kit # MR46ZR or 3-1/8" Shackle Kit # MR76ZR depending on the center-to-center distance of the bolt holes on your current shackle straps.
I wasn't able to locate any specs for your leaf springs, but if you can let me know the center eye to center eye distance when the weight is taken off of the spring (by lifting the trailer frame) I can recommend a replacement for that as well.
Let me know what you have, and I'll help you finish getting set up!
Product Page this Question was Asked From
MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 8 Inch Long
- Tandem Axle
- MORryde
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fifth Wheel Hitch
- Search Results: demco autoslide
- Search Results: trailer wiring
- Search Results: demco 5th wheel hitch
- Search Results: 1621
- Search Results: demco
- Shop: Trailer Wiring
- Q&A: Which Goose Box for a 2022 Grand Design Reflection 31MB?
- Shop: PullRite's ISR SuperRail Mounting Kit - 20K - Fits Ford F-250 & F-350 w/ Aluminum Bed
- Shop: Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- Search Results: rpb72~fd
- Search Results: rpb72 fd
- Video: Mighty Cord 5th Wheel and Gooseneck Wiring Harness Installation - 2015 Ford F-350 Super Duty
- Video: Demco 5th Wheel/Gooseneck Wiring Harness Installation - 2016 Ford F-250 Super Duty
- Shop: Demco Autoslide Locking Plate for Standard 5th Airborne Pin Boxes
- Q&A: Can a Demco Hijacker Autoslide 5th Wheel Hitch Be Used with a Pullrite Capture Plate
- Shop: Underbed Rail and Installation Kit for Demco UMS 5th Wheel and Gooseneck Trailer Hitches
- Shop: Tonneau Cover
- Shop: Demco Autoslide Locking Plate for Lippert Helux Pin Boxes
- Shop: Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621/1621HD - 30K - 4.5K TW
- Shop: Gooseneck Hitch
- Q&A: Recommended Pin Box Upgrade for a Lippert 1621 15,500 lbs Capacity Pin Box
- Q&A: Replacement Pin Box Needed to Tow a 2018 Reflection 337RLS with a PullRite SuperLite
- Q&A: Why is the Locking Plate # DM6025 Required for a MOR/ryde Pin Box When Using the Autoslide Hijacker
- Video: Lippert 1621 5th Wheel Pin Box Feature Review
- Q&A: Demco Autoslide 5th Wheel Hitch Compatibility With Reese Sidewinder Pin Boxes
- Q&A: Can a Reese Sidewinder be Used with a B&W Companion 5th Wheel Trailer Hitch
- Shop: Lippert 1621 5th Wheel Pin Box - 15,500 lbs
- Video: The Low-Down on the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes
- Shop: RV Mattress
Andre
4/30/2025
Hey Jon , thanks so much for the response and the help . I will get the measurements for the leaf springs and get back to you. Thanks again for pointing me in the right direction as I’m looking forward to the upgrade!