Availability of Replacement Control Module for Titan Brake Rite SD

Updated 10/07/2024 | Published 06/15/2014

Question:

Do you sell a replacement controller box for a Brake Rite SD? At the harness going into the control module I have a good ground on the white wire, 4-12V+ variable to the blue from the brake controller, and 12V+ on the black wire. My brake controller is reading that the unit is hooked up but I cannot get the brakes to work under normal operation. I checked the breakaway battery at the plug going into the control unit and it is good at 12V. When I pull the breakaway pin I can hear the master cylinder run. I think I have narrowed it down to a bad control module.

asked by: Eric V

Expert Reply:

We do have a replacement controller box for a Brake Rite SD. It is Replacement Remote Mounted SD Control Module for BrakeRite II, part # T4834200.

I have included a picture of the control module for your reference and a link to helpful article on brake controllers.

expert reply by: Chris O

click to enlarge

Joseph O.

10/7/2024

I would like to purchase the Brake-Rite SD control module thank you Luc

Jon G.

10/7/2024

@JosephO The Replacement SD Control Module T4834200 has been discontinued so it isn't available anymore, so if that's what you need to replace then you'll need to upgrade to a newer unit like the Dexter BrakeRite II Electric Over Hydraulic Actuator Kit # T4813102 that doesn't need the control module.