How to Find Replacement for DICO 40825 Hub
Updated 10/27/2025 | Published 03/11/2025
Question:
I have a DICO 40825 hub I need a replacement for it. Can’t find nothing. Can you help me out?
asked by: Mike B
0
Expert Reply:
Hey Mike! I don't have any information on a DICO 40825 so you will need to identify the bearings and grease seal to find a replacement. Start by checking for part numbers stamped in the side of the bearings. If they are worn or missing, use a digital caliper # PTW80157 to measure the inside diameter. You can also measure the spindle where they ride. If you add this information in the comments below I can check to see if a replacement is available.
expert reply by:
Robin H
0
Bearing and Grease Seal Identification
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Q&A: How to Determine the Replacement Hubs for a 2002 Magic Tilt Trailer
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Diameter of Spindle Washer # SW1000 and Wobble Roller Retainer Ring CE10981
- Q&A: How to Choose the Correct Size Trailer Winch For a Boat Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Installing Trailer Hitch on 2020 Nissan Murano Keep Hands Free Liftgate From Working
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Troubleshooting Trailer Bearings that Fit Almost Too Tight to Install
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
Robin H.
10/27/2025
Hey Mike, were you able to measure the bearings and spindle with the digital caliper to identify your DICO 40825 hub? Once you have those sizes, I can help confirm if a replacement is available. Let me know what you find so we can narrow it down.