Replacement Solution for Dexter 8-237 Hub

Updated 10/27/2025 | Published 03/01/2025

Question:

I have a dexter 8-237 is what is stamped on the hubs and I need a hub assembly for it but I'm not sure what I am doing to be honest with you and need some help please and thank you?

asked by: Steven E

Expert Reply:

Hey Steve! I reached out to Dexter and I'm sorry to say that the 8-237 is an obsolete 2,800 lb hub. Unfortunately, there are no replacements available. The only solution is to replace the axle so you have modern hubs and replacement parts are readily available. You will need to get your hub face measurement and spring seat measurement to find the right replacement.

You will also need to move up in capacity to a 3,500 lb since 2,800 lb axles are also obsolete. If you can add that measurement in the comments below I can see what is available. I went ahead and attached a video which explains how to measure for your reference.

expert reply by: Robin H

Axle Measurements
(click to enlarge)

Robin H.

10/27/2025

Hey Steve, what did you find when you measured your hub face and spring seat for that axle replacement? Once you have those numbers, I can help you match a 3,500‑lb axle that fits. Let me know what you came up with so we can narrow it down.