bing tracking image
Q & A Icon

Troubleshooting No Power to the Curt T-Connector Vehicle Wiring Harness for a 2020 Kia Telluride  

Updated 10/30/2025 | Published 02/08/2025

Question:

After installing the cj68jr kit that was confirmed to work with a 2020 Kia Telluride and purchasing a 7 pin tester the pollak 7way, I can say that the 12volt and trailer brakes do not work, the vehicle came with 4 pin trailer connector installed so installing the curt t connector cj68jr kit was easy but it does not work, please help, do I have to remove and send everything back?

0

Expert Reply:

Hey Guy really sorry to hear about that! So it's very likely that the reason the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C68JR is not working is due to a fuse either being blown or missing.

You're going to need to check your owner's manual to figure out where the fuse should be to verify if there is one or if it's blown.

If you checked that and everything is fine, then I'd suggest making sure there aren't any breaks or damages to the wires.

If there is something else you need help with, please drop a comment and let me know and I'd be happy to help!

expert reply by:
0
Bryce D
Nick S. profile picture

Nick S.

10/30/2025

Hey Guy, did checking the fuses or wiring get the Curt T-Connector working on your Telluride? Knowing what fixed it could really help others running into the same issue.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>