What are the Dimensions of the High Pointe Standard RV Microwave HP59ZR w/ Trim?

Question

Question:

What is the overall dimensions with the trim ring installed?

asked by: JJ

0

Expert Reply:

The High Pointe Standard RV Microwave item # HP59ZR is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep. The trim kit that comes with it is 20.75” wide x 15” tall.

expert reply by: Jerred H

0

Jerred H.

11/3/2025

Hey, did the overall size with the trim ring fit your RV’s microwave cabinet the way you needed? Knowing how it worked out could help others checking clearances for the same model.

Answer 1

The closest option we carry to your current model is the High Pointe Standard RV Microwave - 900 Watts - 1 Cu Ft #HP59ZR. This model is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep and comes with a trim kit that's 20.75” wide x 15”…

view full answer...

Answer 2

Hey Ken, what kind of trailer do you have? Based on your opening the only available option is the High Pointe Built-In RV Microwave #HP59ZR. This fits cutouts measuring 20" wide x 13-1/8" tall x 14-1/8" deep. Our other models require a…

view full answer...

Answer 3

Hey Casey the High Pointe Microwave Model EM923MI2-S has been replaced so we do not have it in stock. The newer model is the High Pointe Built-In Flat Bed RV Microwave - 900 Watts - 1 Cu Ft - Stainless Steel item #HP84ZR. It measures 22-5/16"…

view full answer...

Answer 4

Hi Drew; the High Pointe Built-In Convection Microwave with Air Fryer #HP36ZR may fit in place of your High Pointe EM9225RYS. However, you really need to measure and check the available space to be sure. The required cutout is 14-1/2" tall x…

view full answer...

Answer 5

The closest option we have in size to the High Pointe EM925RWW is the High Pointe Standard RV Microwave #HP59ZR. This microwave is 19-1/8" wide x 11-1/2" tall x 14-13/16" deep. The trim kit that comes with these units is approximately…

view full answer...

Answer 6

Hi Joe, We have a couple options for convection microwaves with an air fryer, and if you can replace your High Pointe EM925AWW depends on the amount of space you have. Your current microwave is 19-1/8" wide x 11-5/16" tall x 14-11/16"…

view full answer...

Answer 7

Hey Mike, the cut out height needed for the High Pointe Microwave part #HP36ZR would be 14-1/2 inches.

view full answer...

Answer 8

The High Pointe Standard RV Microwave #HP27ZR you found is going to be the closest we have to your Dometic CDMW12B. Your microwave is 20-1/8" wide by 12" tall and 15-5/16" deep. The High Pointe is 19-1/8" wide by 11-5/16"…

view full answer...

Answer 9

The Dometic CDMW12S requires a 20.39" wide x 14.52" tall x 16.02" deep opening in order to fit so the closest option we currently offer is going to be the High Pointe Standard RV Microwave #HP59ZR (19.1” wide x 11.5” tall x 14.8”…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

view full answer...

What are the Dimensions of the High Pointe Standard RV Microwave HP59ZR w/ Trim?

Continue Researching