Parts Needed For A Trailer Prewired For A Furrion Vision S RV Camera System
Updated 11/17/2025 | Published 12/30/2024
Products Featured in This Question
Question:
My camper came with a furrion model:20FRCBRKT-BL camera installed what monitor or accessory do i need to be able to use this camera. Thank you!
asked by: Matt M
Expert Reply:
Hey Matt,
The Shark Fin Camera Mounting Bracket # FRCBRKT-BL you have would still require you to purchase the whole system, it just means your installation is going to be a lot easier since your trailer is already prewired. You'll take the four tiny screws out that hold the cover to the mounting bracket and reveal the wire harness that you'll plug the camera into. I typically just reuse the original screws but you can also use the new ones with the camera system. I would definitely hold onto the new mounting bracket as well as a backup since you never know when a tree or something else could hit it.
For the camera system we offer a few different options depending on the amount of cameras you want and the size of the monitor:
Rear camera with a 4.3" monitor # FOS43TASF
Rear camera with a 5" monitor # FOS05TASF
Rear camera with a 7" monitor # FOS07TASF
Rear camera, side marker cameras, 5" monitor # FCE48TASL-05
Rear camera, side marker cameras, marker light with camera, and a 7" monitor # FR59QD
Marker light with camera, side marker cameras, 7" monitor # FR98NR
If you don't want to get the side marker cameras just yet but might in the future you'll want to go with a system that has a 5" or 7" monitor. These have the ability to connect to up to 4 cameras. The 4.3" monitor unfortunately is only able to connect to one camera. If you have any other questions just let me know and I'd be happy to help.
(click to enlarge)
Product Page this Question was Asked From
Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1
- Accessories and Parts
- RV Camera System
- Mounting Hardware
- Camera Mount
- Furrion
more information >
Continue Researching
- Q&A: Replacement Option For Norcold N306.3 RV Fridge
- Q&A: Will Curt Helux Pin Box Work With Demco Autoslide DM8550038?
- Q&A: Does PowerMax Membrane Plus Roof Replacement Kit Ship on Roll or Folded
- Q&A: Gooseneck Pinbox to Replace Curt Helux on 2026 Alliance Paradigm
- Q&A: Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S System
- Q&A: Using A Lippert Turning Point Pin Box With A Demco Autoslide 5th Wheel Hitch
- Q&A: Availability of Replacement Power Cord for Furrion Vision S+
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Install E-Track in 3 Easy Steps
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: Overview of Lubricating Grease
- Article: 5 Things to Know About Weight Distribution Hitches
Chris R.
11/17/2025
Hey Matt, how did things go with adding the Furrion Vision S camera system to your camper’s existing bracket? Your update could make it easier for others working with the same prewired setup.