Can I Go to a 205/65/R15 From a 235/75R15 on the Same Wheel? What Hub do I need for My Hay Rake?
Updated 11/17/2025 | Published 12/23/2024
Products Featured in This Question
Question:
Have 2 old hay rakes with a 4 on 4 hub pattern. Tire size not original are currently 235/75R15. There are no fender or clearance issues. 1. Can I use 205/65/R15 tires on these rims? 2. Do you sell a 5 on 4.5 hub that could be used to replace the current hubs. I understand I may have to replace spindles too to do this. Total weight of each rake is around 750 lbs. Wheels are due to the rake being ground driven. There is no other load on these tires. Thank you.
asked by: Dl
Expert Reply:
Hello Dl,
Yes, you will be able to swap your 235/75R15 for the new tire size 205/65/R15, they are both for a 15" wheel, the 205/65/R15 is going to be a little bit narrower (by 30 millimeters) but will go on just fine. The 205/65/R15 would be a great fit for the # AM22653.
As for the hubs, to get you into a more common 5 on 4 1/2" bolt pattern, I see that the Hay Rakes usually have a straight spindle (you will want to double check) with bearing numbers L44643 (I.D. 1") for both inner and outer. If that is the case, you will want to use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-LFEZ-1K. If you pull your bearings out, or measure the spindle and it does not match up, let me know what you do have so I can find the right part for you. I have included an image that shows where to measure the spindle (using a digital caliper) if you cannot find the numbers on the bearings.
Happy Holidays to you and your family, from your friends here at etrailer!
(click to enlarge)
Product Page this Question was Asked From
Aluminum Sendel Series T02 Machined Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Aluminum Wheels
- Sendel
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearing Kit for a Lippert 122093 Hub
- Q&A: Looking For Picture Of Goodyear Endurance ST205/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel GY37QB
- Q&A: Recommended 205/75R15 Radial Tire Made in America
- Q&A: Recommended 7-Way Trailer Wiring On 2007 Ford E-350 Super Duty Van
- Q&A: Looking For Electric Brakes And Hub/Drums For Lippert 3,500 lb Axle
- Q&A: What are the Correct Bearings, Races, and Seals for 4,400 Pound Axle?
- Q&A: Availability Of Goodyear Endurance ST225/75R15 Tire Mounted On 5-Lug Aluminum Wheel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Replace a Rubber RV Roof
- Article: How to Choose the Right Trailer Hitch Class
- Article: Which Hitches are Made in the USA
Kate F.
11/17/2025
Hey Dl, how did the swap to the 205/65R15 tires work out on your hay rakes? Were you able to confirm the spindle size and try the 5 on 4-1/2 hub setup? Your results could really help others working with older ground-driven rakes.