How to Measure for a Replacement Hub
Updated 11/17/2025 | Published 12/11/2024
Products Featured in This Question
Question:
Hi Im looking for a replacement hub for a trailer. The existing trailer hub is a d-46915. It looks to be discontinued. Any help would be appreciated Kindly
asked by: Nicole
Expert Reply:
I am sorry Nicole but I can not find any information on the d-46915 hub you referenced. I am going to need you to see if there are any part numbers stamped into the sides of the bearings. This would be the easiest way to identify a replacement. If you could leave that information along with your lug nut pattern in the comments below I would be happy to find you a replacement option.
If you do not have any part numbers stamped into your bearings you'll have to measure your spindle with a digital caliper like item # PTW80157. I have linked a diagram below that will show you where to measure.
(click to enlarge)
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Should Trailer Equalizers have Side to Side Movement When Installed
- Q&A: Weld-On Spindle for Trash Trailer Without Suspension
- Q&A: Recommended Replacement Square 1.5" Spindle for a Boat Trailer
- Q&A: Firestone Air Bags for 2026 Ford F-350 FX4 Dually
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Double-Eye Trailer Suspension System Review
Jerred H.
11/17/2025
Hey Nicole, were you able to find the bearing numbers or measure your spindle with the digital caliper? Once you have that info, I can help you track down the right replacement hub. Let me know what you find so we can get you matched up.