Availability of a 2.5" Round Amber Light for a Turn Signal
Updated 11/17/2025 | Published 12/09/2024
Question:
Do you have a 2.5” round amber light that can be used as a turn signal?
asked by: Shaun H
Expert Reply:
Hey Shaun,
It sounds like you're looking for the Optronics LED Clearance or Side Marker Trailer Light w/ Reflector # MCL0040ABB or something similar to it. If you need a different style please let me know and I can help you filter through the linked selection to get what you're needing.
These can be used as a turn signal if you have a dedicated turn signal circuit. Typically, the turn signal is on the same circuit as the brake signal though so you'll need to make sure those are separated out.
Product Page this Question was Asked From
Optronics LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Round - Amber Lens
- Trailer Lights
- Clearance Lights
- Marker
- Round
- Surface Mount
- Non-Submersible Lights
- LED Light
- 2-1/2 Inch Diameter
- Amber
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Lighting Requirements
- Q&A: Replacement Converter for WFCO WF-9855
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Looking For Replacement Marker Light SAE A PC2 DOT 17 For A 2022 Surveyor Legend
- Q&A: Why Won't WFCO Converter Charger Go Into Bulk Mode For Lithium Batteries?
- Q&A: Replacement for WFCO 9855 Converter in Travel Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can You Hook Up Weber Traveler Grille to Quick Disconnect Port On Side of Trailer
- Q&A: Brake Controller Plug In Location for a 2007 Toyota Land Cruiser
- Q&A: Location of Brake Controller Plug-In Port on 2006 Toyota Land Cruiser with Factory 7-Way Socket
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: Converting Your RV Water Heater to Tankless
- Article: Pintle-Hitches
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
Jon G.
11/17/2025
Hey Shaun, how did the Optronics amber light work out for your turn signal setup? Were you able to get the circuit separated so it functions the way you wanted? Your update could make it easier for others wiring similar lights.