Replacement Brake Assemblies And Shower Pan For A 2012 Prime Time Sanibel 3600 5th Wheel

Updated 11/25/2024 | Published 11/22/2024

Question:

Hello. I am looking for brake kits for my 2012 primetime sanibel 3600. Also a new shower pan. Thank you

asked by: Christopher S

Expert Reply:

Hey Christopher,

There unfortunately isn't a guide to tell us what parts are on your trailer so you'll need to take some measurements for us to determine the correct replacements. For the brakes we'll either need to know the axle capacity and brake type (electric drum, electric-over-hydraulic drum or disc, surge-hydraulic drum). If you don't know the axle capacity and have drum brakes you can just measure the inside of the hub to see what would fit (depicted in diagram below).

for the shower pan we'll just need to know the length and width of your current pan and where the drain hole sits (left, right, center) in order to find the correct replacement.

expert reply by: Kevin C

How to measure for drum brake assemblies
(click to enlarge)

Christopher S.

11/22/2024

PRIMETIME MEG. PLANT 449 Dexter axle WAKARUSA, INI devrerale.com PO: 49-101135 n. IN HF=86:50 SC=68.50 070 9217395 S/N: 131049141 CAPACITY: 7000 LBS Dek/: 1217995 Due: 1626/2 10 19 V2 07 43 51 6

Kevin C.

11/25/2024

@ChristopherS For a 7k axle you would need part # AKEBRK-6 for manual-adjust assemblies or part # AKEBRK-7-SA for self-adjusting assemblies.

Helpful Links

tv-install-etrailer-trailer-brakes-2019-grand-design-reflection-150-fifth-wheel-akebrk-7-sa.aspx

Christopher S.

11/25/2024

@KevinC do you have the entire hub assembly? Like a bolt on setup?

Kevin C.

11/25/2024

@ChristopherS I'll have to reach out to Dexter to confirm the bearings and grease seal to determine the correct hub assembly for your spindle but the brake assemblies I listed above would still work regardless and would just reuse the mounting bolts from the previous brake assemblies. Once I get word back from Dexter I'll let you know which hubs to use.