Recommended Gooseneck Hitch and 7-Way Wiring Harness for a 1970 Ford Ranger 250
Updated 12/15/2025 | Published 11/08/2024
Products Featured in This Question
Question:
I am wondering if you have a recommendation for a gooseneck hitch that would fit a 1970 Ford Ranger 250 camper special. Same goes for wiring harness that would hook to my horse trailer 7 pin. Thanks
asked by: Lee T
Helpful Expert Reply:
Hey Lee! That's a pretty old truck so we're not going to have anything custom fit for it. The best I can do is the Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch item # 3375613500. You'll need to take this to your local fabricator and have them weld on some steel plates to get this installed for you.
To add a 7-Way connector to your truck you're going to need to install two separate wiring harnesses because there isn't just one that'll do the job. The first one is the Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps item # C58044. This will splice into your Ford's tail lights and add a 4-way harness to your truck.
The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.
Since your horse trailer has a 7-way you are also going to need a brake controller, I recommend the Tekonsha Primus IQ item # TK90160. This will allow you to control your trailer's brakes. It comes with everything you need to install it in your Ford truck.
Product Page this Question was Asked From
Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch
- Gooseneck Hitch
- Below the Bed
- Flip-Over Ball
- 7500 lbs TW
- 30000 lbs GTW
- In Bed Release
- Bolt-On Loop
- Buyers Products
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What is Width Dimensions of Atlas IV Hydraulic Trailer Jack # ST23FR
- Q&A: Best Fifth Wheel to Gooseneck Pin Box Conversion 2026 Jayco Eagle 25 RUC
- Q&A: How Much Does The Gen-Y Hitch Nomad 5th Wheel to Gooseneck GY37ND Weigh?
- Q&A: How Large is the Buyers 3375613500 Fabricator Hitch?
- Q&A: Replacement Installation Bolts and Torque Specs for the Gen-Y Nomad 5th Wheel to Gooseneck PinBox
- Q&A: Dimensions of B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500
- Q&A: Looking for Brackets to Install Fifth Wheel Rails in 2000 Ford F-350
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Gooseneck to 5th Wheel Adapters
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Ram Trailer Tow Prep Package
- Article: Gooseneck Trailer Hitch Information and Review
- Article: Trailer Hitch Receiver Sizes
Jerred H.
12/15/2025
Hey Lee, how did things go with the Buyers Products gooseneck hitch and the wiring setup on your Ford Ranger 250? Were you able to get everything welded and connected for your horse trailer? Your update could make it easier for others working with older trucks.