Will HD1377 Work with Dexter Axle with #84 Spindle
Updated 01/05/2026 | Published 09/26/2024
Products Featured in This Question
Question:
Hello, I would like to replace my trailer axles currently axles, plan to use straight axles. The hub drum is marked Freedom Axle HD1377. Can I use these hubs with a Dexter axle with 84 spindle? possibly: T3584F-EZ-8974 thank you
asked by: Gregory C
(click to enlarge)
Expert Reply:
Hey Gregory, thanks for reaching out!
The Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3 will work with #84 spindles and is a direct replacement for your HD1377 hub drum so they can be used interchangeably.
These will also work with the Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974 you referenced.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Replacement Brakes And Drums For A 7k Rated Sloan Kwik Load Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: How to Pick Out Replacement Hubs for a Boat Trailer
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
Robin H.
1/5/2026
Hey Gregory, how did things go with the Dexter hub and drum on your new straight axle setup? Did the fit with the 84 spindle work out as expected? Your update could make it easier for the next person working on a similar axle swap.