Trailer Hitch for 2023 Cadillac Lyriq for Scooter Carrier

Question

Question:

Thanks for including a means to contact you Bud. My model is the Debut version of 2023 Lyriq but without the all wheel drive option. I would like to have a class III hitch installed to tow a hitch mounted carrier and two electric wheelchairs, totaling 250 lbs. This carrier with bi-fold loading ramp lets you easily transport scooters, wheelchairs, push mowers, and snow machines. ?? Carrier platform is 62? L x 32.5? W ?? Bi Fold Ramp is 49? L x 30.5? W ?? 500-lb. load capacity c Part No: WCR2960B2 Please recommend the proper hitch and you opinion regarding the carrier <100 lbz, two wheelchairs, 75lbs. each. Thank you, Mike White.

asked by: MICHAEL W

0

Expert Reply:

Hey Michael, the hitch we offer that fits your 2023 Cadillac Lyriq that has the highest tongue weight capacity is the EcoHitch part # EH75KR which has a 400 lb tongue weight capacity. This would be your best option for your Lyriq to install the carrier you mentioned in.

expert reply by: Jameson C

0

Jameson C.

1/5/2026

Hey Michael, how did the EcoHitch work out on your Lyriq for carrying the wheelchairs? It’d be great to hear how the setup handled the weight and balance. Your update could make it easier for others planning a similar carrier setup.

Answer 1

Hello Dan, thanks for reaching out. We do carry the EcoHitch Class 3 Hitch #EH75KR which is a fit for the 2024 Cadillac Lyriq Luxury 3. I am sorry to say that we do not have a PDF of the instructions that I can send you. They only exist in paper form…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Trailer Hitch for 2023 Cadillac Lyriq for Scooter Carrier

Product Page this Question was Asked From

Continue Researching