Recommended Wiring Harness for a 2024 Kia Soul

Question

Question:

You demoed the C89KR on 2023 KIA soul . Will it fit the 2024 soul.

asked by: Thurman

1

Helpful Expert Reply:

Yes, it will! The Curt T-Connector Vehicle Wiring Harness item # C89KR has been confirmed to fit the 2024 Kia Soul's with or without LED lights. This custom-fit T-connector plugs into your Kia's wiring harness behind your rear tail lights. It will provide you with a 4-flat connector.

expert reply by: Jerred H

1

Jerred H.

1/12/2026

Hey, how did the Curt T-Connector work out on your 2024 Soul? It sounds like it should have plugged right in behind the tail lights. Your update could make it easier for others with the same car.

Thurman

1/14/2026

It was straight forward and fairly simple. The hardest part of job is getting the new wires through the holes going too hitch. Just use a piece of stiff wire attached to new wires this will inable you to pull them through hole in body panel. HOPE THIS MAKES SENSE.

Jerred H.

1/15/2026

@Thurman Yes, it does! Glad you got it all figured out though.

Answer 1

To add a 4-way wiring harness for your 2023 Kia Soul, I recommend the Curt T-Connector Vehicle Wiring Harness item #C89KR. This custom fit wiring harness plugs into your Soul's factory wiring harness behind your rear tail lights. The Curt…

view full answer...

Answer 2

Yes, it does unless yours is the 1.6L turbo model! The Curt Hitch item #C67FR has been confirmed to fit the 2024 Kia Soul. This hitch is custom fit and bolts to your Kia with included hardware. The Curt item #C67FR is a class I hitch with a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...