Lug Nuts for Aluminum Eagle Trailer Wheel

Question

Question:

What style lug nut is required for these wheels? Will a 60° conical/cone bulge work?

asked by: Steve

0

Expert Reply:

Hi Steve; the Aluminum Eagle Trailer Wheel # LH36VR uses 1/2"-20 lug nuts with a standard 60 degree cone like the # LHLR103.

expert reply by: Robin H

0

Robin H.

1/12/2026

Hey Steve, did the 60-degree cone lug nuts end up fitting well with your Aluminum Eagle trailer wheels? Knowing how they worked could help others choosing the same setup.

Reply

Answer 1

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

view full answer...

Answer 2

Hi Daylen; all of our wheels are going to have zero offset since they're designed for trailers. I'm not sure if you need pure black or if black and silver will also work so I have a variety of options for you. The following wheels are all…

view full answer...

Answer 3

The actual weight of aluminum wheels versus steel wheels will depend on the design. For instance the Aluminum Sendel Series T02 Machined Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 #AM22654 will weigh 20 lbs and the Aluminum Lynx Trailer…

view full answer...

Answer 4

When it comes to a 205/75R14 trailer tire like the Kenda, #AM10234, this size of tire will fit a 5", 5-1/2", 6", or 6-1/2" rim. I spoke with our in-house tire expert and he said that when it comes to choosing a rim for a trailer…

view full answer...

Answer 5

The Taskmaster ST215/75R14 Radial Trailer Tire #TTWTRTM2157514D that you referenced will fit the 14 inch rim you have currently that has/had a 205/75R14 tire on it. It will be just slightly wider (.4 of an inch), and slightly taller (10 mm), than…

view full answer...

Answer 6

Hi Tyrell! The Taskmaster Aluminum County Line Series Trailer Wheel - 15" x 5" - 5 on 4-1/2 - Machined Black Fork #TA27XR does indeed come with the black center cap. If you were also interested in the 15" Lionshead Aluminum Eagle…

view full answer...

Answer 7

Hi Bill! You are correct. The Lionshead Steel Spoke Trailer Wheel - 15" x 5" - 5 on 4-1/2 - Black #LH62VR does not have any offset. When we have a wheel that does, then we have it mentioned in the title as well as the description. Not sure…

view full answer...

Answer 8

Hey Hawk, so the Penguin II like the part #DMC86ZR that you referenced can attach to the air box you have now from your Penguin I but the thermostats are not the same so what you would need to do is upgrade the control module with the part #DMC25RR…

view full answer...

Answer 9

Hey Gary, sorry for the confusion on that but the hitch pin holes of the BulletProof WD shank #BPH75RR are separated by 1-1/2 inches. So you'd add 1.5 inches to the 7 inches that you have in your picture and it would be 8.5 inches. What WD system…

view full answer...

Answer 10

There really isn't a time frame for when the studs need to be replaced since wear and tear can differ depending on usage and climate. If you feel your studs are starting to look bad or the threads are tore up then you'll want to pop one out…

view full answer...

Answer 11

Hey Shane, yes the replacement metal valve stem part #AM20906 does fit the Aluminum Eagle Trailer Wheel part #LH36VR that you referenced. It comes with fittings to allow it to basically fit all trailer wheel sizes. Did your rubber ones fail?

view full answer...

Answer 12

Thanks for the pictures! The Aluminum Viking Series Valhalla Trailer Wheel item #AX02455545BMFL would be a great upgrade from the factory wheels that came with your Ranger's boat trailer. Your Goodyear ST215/75R14 tires will fit the 14" x…

view full answer...

Lug Nuts for Aluminum Eagle Trailer Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching