Will The ProGrip Adjustable Wheel Net # 317-18900 Fit 30" Can Am Commander Wheels

Updated 01/27/2026 | Published 08/18/2024

Question:

I have a Can am Commander with 30” wheels and am looking at two of the Pro Grip model 317-18900. My Trailer is an aluminum 12’x7’with tie downs in the corners. There would be a 6” offset from the tire to the tie down. Will the 317-18900 work. Thanks

asked by: Bill K

Expert Reply:

Hey Bill,

The ProGrip Adjustable Wheel Net with Ratchet and Snap Hooks # 317-18900 can fit tires up to 33" in diameter x 12-1/2" wide. The tie-downs sitting 6" out from the wheels isn't going to be an issue. The non-ratcheting hook has a 21-1/2" long strap that you would not be able to adjust. The top vertical strap has loops to adjust the height so that the horizontal strap that grips the tire can sit around the middle.

I would just double check the width of your tires to make sure they fall under the 12-1/2" maximum, but you should be good to go.

expert reply by: Kevin C

Katrina D.

1/27/2026

Hey Bill, how did the ProGrip wheel nets work out with your Can-Am Commander and trailer setup? Your feedback could help others trying to secure similar side-by-sides.