Availability of Front and Rear Anti-Sway Bars for 2007 Itasca Sunova
Updated 01/19/2026 | Published 08/14/2024
Products Featured in This Question
Question:
do you make front and rear sway bars for a 2007 Winnebago Itsca Sunova
asked by: Stephen M
Expert Reply:
Hi Stephen; we do have front and rear anti-sway bars for your 2007 Itasca Sunova. According to their brochure there are two possible options for your chassis so you will have to determine which you have, the Workhorse W-Series or the Ford F-53. For the W-Series you will have to determine the exact "W" model and for the F-53 you will need to know your GVWR. Once you have this information you can choose from the following:
Workhorse W-Series
-Roadmaster Front Anti-Sway Bar - 1-5/8" Diameter # RM-1259-115 (W16 and W18)
-Roadmaster Front Anti-Sway Bar - 1-5/8" Diameter # RM-1259-105 (W20, W22, W24)
-Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1259-118 (W16 and W18)
-Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1259-108 (W20, W22, W24)
Ford F-53
-Roadmaster Front Anti-Sway Bar - 1-3/4" Diameter # RM-1139-148 (Unless you have the 26P)
-Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1139-146 (For 16k and 18k GVWR Models)
-Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter # RM-1139-145 (For 20,500 GVWR Models)
This may take a little research on your part but that is the best I can do with the available information. You should have some kind of identification sticker, probably on the wall by the driver seat, that may give you this info. If not, find the VIN and call the manufacturer. If you have any more questions or aren't sure which one to pick once you get this information feel free to respond in the comments below.
Product Page this Question was Asked From
Roadmaster Front Anti-Sway Bar - 1-3/4" Diameter
- Anti-Sway Bars
- Anti-Sway Bar
- Front
- 1-3/4 Inch Diameter
- Fixed End Link
- No Drilling Required
- Mounting Hardware Included
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can I Run the Blue Ox Patriot Braking System On It's Own 6 Volt or 12 Volt Battery?
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Q&A: Recommended Anti-Sway Bar, Steering Stabilizer, and Air Bags for 2018 Thor ACE 30.3
- Q&A: Recommended Anti-Sway Bars for a 2017 Forest River Sunseeker Motorhome on a E-450 Class C Chassis
- Q&A: Correct Roadmaster Steering Stabilizer for a 2025 Ford F-53
- Q&A: Comparing Roadmaster and Hellwig Sway Bars for Motorhome Built on E-450 Chassis
- Q&A: Recommended Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks for 8,000 lbs Axles
- Q&A: Recommended Rear Sway Bar for a 2024 Ford F-550 Cab and Chassis
- Article: Stability Control for Heavy Duty Vehicles
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Flat Towing Package for 2015-2018 Chevrolet Silverado 2500
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The Best Electric Trailer Jacks of 2025
Robin H.
1/19/2026
Hey Stephen, were you able to confirm whether your Itasca Sunova is on the Workhorse or Ford chassis? Knowing which one you have will make it easier to choose the right front and rear anti-sway bars. Your update could make it easier for others with the same motorhome.