Availability Of 2,000 Lb Axle With 62-3/4" HF And 52-1/2" SC
Updated 01/19/2026 | Published 08/01/2024
Question:
Can you build an axle to these specs with 5x4.5 hubs? 2000lb capacity. If so, how much? Face to face 62 3/4 Leaf spring to leaf spring 52 1/2
asked by: David
0
Expert Reply:
Thanks for reaching out, David. Unfortunately we do not build axles here at etrailer, nor we do carry an axle that meets your exact specifications. Our closest option is the Trailer Idler Axle Beam # e84YR. This is rated for 2,000 lbs and the fact to face measurement is 60". If this will not work for you, I suggest reaching out to an axle manufacturer such as Dexter.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Axle for a 1990 EZ Loader Boat Trailer
- Article: How Much Does a Boat and Trailer Weigh?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: How To Find The Right Axle/Axle Options For Pop-Up Campers
- Q&A: What Replacement Converter Do I Need for a Series 7300 Model 7345 Converter?
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: How to Pick Out Replacement Hubs for Yacht Club Trailer WC112
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
Jesse M.
1/19/2026
Hey David, were you able to find an axle that matched your 62 3/4" face-to-face and 52 1/2" spring measurements? Knowing what worked could help others trying to match similar specs.