5th Wheel Hitch Cup Needed for 5th Wheel Trailer Tripod

Updated 11/19/2025 | Published 07/26/2024

Products Featured in This Question

Replacement Hitch Cup Assembly for Ultra-Fab 5th Wheel King Pin Tripod Stabilizers

(27)

$39.21

Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel - 37" to 50" - 5,000 lbs

(261)

$164.14

Question:

I have a tripod with a gooseneck ball on it and no longer have the camper I used it with. I now have a regular fifth wheel and would like to have a threaded fifth wheel adapter for my tripod support. Can u help me out? Thanks

asked by: Robert B

Expert Reply:

Hey Robert, thanks for reaching out!

It sounds like you're talking about the Replacement Hitch Cup Assembly # UF19-001056 for the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer # UF19-950001.

If you have a different brand tripod then you'll need to make sure it's compatible with 1-1/4"-10 threads in order for this hitch cup to fit properly.

expert reply by: Jon G

Robert

8/7/2024

Unfortunately my stabilizer is a Camco 48850 so not sure of the hitch cup will fit or not?

Jon G.

8/9/2024

@Robert I've reached out to Camco about this but I haven't been able to get a response back from them. If you measure what the thread count is (per inch) for the gooseneck ball, then you'll be able to compare that to the Ultra-Fab cup to see if that part is even compatible.

Colton

11/19/2025

I bought the hitch cup assembly for a stabilizer because I have a fifth wheel camper and sellers gave me a gooseneck stabilizer. The hitch cup threads are just barely too wide so it doesn’t swap out. Any other options?